Ion-audio Sound Splash User Manual download pdf (Page 4)

BLUETOOTH PAIRING

Bluetooth pairing occurs when two

Bluetooth devices agree to

communicate with each other, enabling

them to link and exchange data.

Pairing with iPhone®, iPad®, and

iPod touch®:

Note: iOS 4.0 or higher is required.

1. Press and hold SOUND

SPLASH's power button for 4-5

seconds to power it on.

2. Press and hold SOUND SPLASH's Bluetooth button for 2 seconds. You will hear hear a

tone and the blue LED will flash.

3. On your iPhone, go to Settings > General > Bluetooth. Slide the Bluetooth slider to

"On." SOUND SPLASH will attempt to pair with nearby Bluetooth devices.

4. On the iPhone’s screen, "ION SOUND SPLASH" will appear as a Bluetooth device. Tap

it to select it.

5. If your iPhone requires a passcode or PIN, enter the number zero (“0”) four times.

Pairing with other devices:

1. Press and hold SOUND SPLASH's power button for 4-5 seconds to power it on.

2. Press and hold SOUND SPLASH's Bluetooth button for 2 seconds. You will hear a tone

and the blue LED will flash.

3. Go to your device's Bluetooth settings menu to turn on Bluetooth.

4. On your device's screen “ION SOUND SPLASH” will appear as a Bluetooth device.

Select it to pair and connect with SOUND SPLASH.

5. If your device requires a passcode or PIN, enter the number zero (“0”) four times.

6. If your device fails to pair correctly, simply power SOUND SPLASH on/off and attempt

to pair again.

SOUND SPLASH LED activity:

Blinking Blue LED = Bluetooth pairing mode

Solid Blue LED = Connected to a Bluetooth

device

Blinking Blue and Red LED = Incoming call

Blinking Red LED = Low battery on SOUND

SPLASH

iPhone, iPad, and iPod touch are trademarks of Apple, Inc., registered in the U.S.A.

1 2 3 4 5 6 7 8 9 ... 27 28

No comments

Ion-audio Sound Splash User Manual Page 4