Ion-audio TTUSB10 User Manual download pdf (Page 3)

(ENGLISH) QUICK START GUIDE

o Make sure all items listed on the front of this guide are included in the box.

o READ SAFETY INSTRUCTION BOOKLET BEFORE USING THE PRODUCT

o Go to http://www.ion-audio.com for product registration.

INTRODUCTION

The USB turntable connects directly to your computer to turn your treasured vinyl recordings into digital

music. We have included two software packages to aid you in converting your vinyl recordings:

EZ Vinyl / Tape Converter (PC only) or EZ Audio Converter (Mac only) is the quickest and easiest way to

turn your recordings into digital media. EZ Vinyl / Tape Converter or EZ Audio Converter conveniently saves

your recordings in your iTunes* library. Novice users may find this application preferable. On the CD, we

have included a handy Quickstart Guide with step-by-step instructions on software installation and operation.

To install the software: simply insert the included CD into your computer

and follow the on-screen instructions. After you finish converting your

vinyl, you can then burn to CD or load onto portable media devices.

GENERAL CONTROLS

1. Power Cable: This power cable should

be plugged into a wall receptacle AFTER

all audio connections are made.

2. RCA Audio Output Cables: These

cables should be plugged into the audio

inputs of your home stereo system.

(Please note: you can still copy records to

your computer, even if the audio outputs

of the turntable are not connected to a

stereo system. It is also possible to hear

your records through your computer, as

long as you have configured your

computer’s sound input and output

options correctly

3. There is a switch on the bottom panel,

next to the RCA cables, that selects

between PHONO/LINE. Use PHONO

level for plugging into a turntable input on

a home stereo. Use the LINE level for

plugging into CD/AUX/TAPE inputs.

WARNING: You may damage your

receiver if you plug in a LINE level into

a PHONO input.

4. Gain: This knob can be used to adjust

the gain level of the audio signal from the

turntable. If the audio from the turntable

is too quiet or too loud, use this knob to

adjust the volume setting.

5. USB Audio Output: Use the included

USB Cable to connect your turntable to

your computer. For transferring your vinyl records to your computer, we have provided two different

software packages on the included CD.

6. Power Button: Use this button to power the turntable on and off.

7. Platter: This platter must be securely fastened to the turntable prior to operation. The Motor Drive Belt

can be found on the drive ring underneath the platter. See SETUP INSTRUCTIONS for detailed

information on installing the Motor Drive Belt.

8. Start/Stop Button: This button starts and stops the turntable motor. If the button seems not to be

functioning, check to make sure that the Motor Drive Belt is properly installed in the SETUP

INSTRUCTIONS.

9. 1/8” Stereo Line Input: Connect Tape Players, Reel to Reel, or any other audio source here. This

signal is sent to the computer through the USB connection. Make sure that your phono cartridge is

installed while using this input for maximum sound quality. Also make sure that your RCA jacks

are either plugged into an input device or not in contact with metal.

Note: The 1/8" audio input is not routed to the turntable's RCA output jacks, only to your computer via

USB.

* iTunes and iPod are trademarks of

Apple, Inc., registered in the U.S.A. and

other countries.

1 2 3 4 5 6 7 8 ... 19 20

Comments to this Manuals

No comments

Ion-audio TTUSB10 User Manual Page 3

Comments to this Manuals

Related products and manuals for Audio Ion-audio TTUSB10