Ion-audio Rock Speaker Bluetooth User Manual download pdf (Page 4)

Parts Description

1. Power – Hold this button to power Rock Speaker Bluetooth on and

off.

2. Bluetooth Connect – Press this button to begin Bluetooth

connecting.

Note: Rock Speaker Bluetooth will automatically power off after 30

minutes if no device is connected. After 2 hours of no music

playing, Rock Speaker Bluetooth will automatically power off, even

if still connected.

3. Link – Press this button to link two Rock Speaker Bluetooth

units together.

4. Charging Adapter Input – Insert the included charging

adapter here to charge the Rock Speaker Bluetooth battery.

5. Reset – If Rock Speaker Bluetooth is working abnormally,

shutdown the unit by placing a paperclip into the Reset hole

located on the bottom of Rock Speaker Bluetooth, and gently

push until the unit turns off. Try this only after you have first

attempted to reboot Rock Speaker Bluetooth using the power

button.

6. Charging LED – This LED is solid red when the battery is

charging and turns off when the battery is fully charged/no

adapter is connected.

7. Bluetooth LED – This LED slowly blinks blue when the

speaker is powered on, blinks fast while Bluetooth searching,

and is solid when Bluetooth connected.

8. Link LED – This LED blinks fast when searching for another

Rock Speaker Bluetooth and is solid when linked to another

Rock Speaker Bluetooth.

Bluetooth Connecting with Rock Speaker Bluetooth

Connecting to one Rock Speaker Bluetooth:

1. Power on Rock Speaker Bluetooth by holding down the power button. A tone will be heard when powering on.

2. Press the Bluetooth Connect button to enter Connecting Mode.

Navigate to your device’s Bluetooth setup screen, find Rock Speaker Bluetooth, and connect. Rock Speaker

Bluetooth LED will light up solid when it is connected and play a tone.

Note: If you experience trouble in connecting, select “Forget this Device” on your Bluetooth device and try to

connect again.

Note: Consider updating your device’s OS if you experience trouble with connecting or playing music.

3. To disconnect, hold the Bluetooth Connect button on Rock Speaker Bluetooth. A tone will be heard when

disconnecting.

4. If your Bluetooth device is not able to connect to Rock Speaker Bluetooth, hold the Bluetooth Connect button

on the speaker to break previous Bluetooth connections and reset the Bluetooth module.

Linking two Rock Speaker Bluetooth units:

Note: Ensure that the speakers are not already Bluetooth connected in single mode. If either of them is connected,

hold the Bluetooth Connect button to disconnect and then follow the steps below.

1. Power on each Rock Speaker Bluetooth by holding down their power buttons. A tone will be heard from each

speaker when powering on.

2. Press the Link button on each Rock Speaker Bluetooth. The speakers will search for each other while playing

an intermittent tone. Once found, they will play a tone to confirm they are linked. This may take up to 2 minutes

the first time two speakers are linked.

3. Press the Bluetooth Connect button on the Rock Speaker Bluetooth that you want to be the "master" (left

channel). This is the unit that your device will connect to, and the unit from which the Bluetooth range will be

determined.

4. Navigate to your device’s Bluetooth setup screen, find Rock Speaker Bluetooth, and connect. A tone will be

heard when connected.

Note: If you experience trouble in connecting, select “Forget this Device” for Rock Speaker Bluetooth on your

Bluetooth device and try to connect again.

Note: Consider updating your device’s OS if you experience trouble with connecting or playing music.

5. To disconnect linking, hold the Link button on the “master” Rock Speaker Bluetooth for 5 seconds. A tone will

be heard when disconnecting.

6. If your Bluetooth device is not able to connect to Rock Speaker Bluetooth, hold the Bluetooth Connect button

on the speaker to break previous Bluetooth connections and reset the Bluetooth module.

Note: When two speakers are linked, hold the power button on one speaker to turn both speakers off. The

speakers will relink automatically the next time they are both powered on.

Rock Speaker Bluetooth LED

activity:

Solid Red Charging LED = Battery is

charging, LED turns off when charging

is full or when no adapter is

connected.

Solid Blue Bluetooth LED =

Connected to a Bluetooth device.

Blinking Blue Bluetooth LED =

Blinks slow when powered on. Fast

blinking when searching for Bluetooth

devices to connect to.

Solid Link LED = Linked to another

Rock Speaker Bluetooth.

Blinking Link LED = Blinks fast when

searching for another Rock Speaker

Bluetooth to link to.

LINK

1 2 3 4 5 6 7 8 9 ... 15 16

Comments to this Manuals

No comments

Ion-audio Rock Speaker Bluetooth User Manual Page 4

Comments to this Manuals

Related products and manuals for Acoustics Ion-audio Rock Speaker Bluetooth